Chris Reeve Knives products at Altonaer Silberwerkstatt

Sebenza 31 CGG – Computer Generated Graphic: Forever Flag CPM MagnaCut blade, stonewashed, 63–64 RC 6AL4V titanium handles, glass blasted Reeve Integral Lock with Ceramic Ball Interface Made in Boise, Idaho, USA When Chris and Anne Reeve became naturalized American citizens in 2002, the American flag became their Forever Flag. It has held a place on their knives ever since — one of the most personal graphics Chris Reeve Knives has ever put on a blade. The Sebenza 31 CGG Forever Flag depicts the flag in motion: not static, not decorative, but flying — the way it has stood above people in moments that mattered. For the Reeves, it is not a political statement, but a personal one: a commitment to the country they chose as their home. The knife itself needs no introduction. The Sebenza has been the benchmark for production folders for decades. The CPM MagnaCut blade — one of the most capable production knife steels available today — is stonewashed and hardened to 63–64 RC. The 6AL4V titanium handles are glass blasted and will feel the same after twenty years of daily carry as they do on day one. The Reeve Integral Lock with Ceramic Ball Interface remains one of the most reliable locking mechanisms ever built into a production folder. The CGG finish is worked directly into the titanium scale — no sticker, no inlay print, but a process that becomes part of the knife's own surface. The result is a graphic that ages with the knife without fading. Dimensions & Weight Overall length Large: 8.40" (213.4 mm) / Small: 6.98" (177.3 mm) Weight Large: 4.7 oz (133 g) / Small: 3.0 oz (85 g) Lifetime Warranty: Chris Reeve Knives stands behind every knife for its entire service life — including a free Clean, Tune, Sharpen, and re-sandblast for unmodified knives.

Chris Reeve Knives Sebenza 31 Available in Large or SmallReeve Integral Lock with ceramic ball on the lockbarBlade steel: MagnaCutClip design: offset (on the 31, the clip now sits diagonally rather than straight) Open the blade and you notice it straight away: everything here just fits! You won’t find any bearings, yet it runs as if it’s been oiled, because the tolerances really are spot on, down to the last detail. Pick up a Sebenza for the first time and you’re guaranteed to open and close it a few more times afterwards. Just because. The Sebenza is the folder from Chris Reeve Knives in Boise, Idaho, and for many in the scene it’s the grail knife, full stop. The name comes from Zulu and means work, a nod to Chris Reeve’s South African roots. The first Sebenza was made in 1987, and since 2019 the Sebenza 31 has been the current generation and successor to the legendary Sebenza 21. The basic shape has stayed the same. The improvements are in places you’ll only notice on second glance. First and foremost, the Reeve Integral Lock, Chris Reeve’s take on the frame lock. On the 31, a ceramic ball sits in the lockbar and presses against the blade tang. Ceramic is so hard that practically nothing wears at this contact point over the years. That’s why the lock-up should feel the same after long use as it did on day one. You may already know the principle from the Umnumzaan and the Inkosi. On the 31, the clip is offset and sits at a slight angle, so it no longer presses on the lockbar. On top of that, the finger groove at the front of the handle has been reground, and you feel that straight away in the grip. The handle is made from sandblasted titanium, the hollow-ground blade from CPM MagnaCut. The steel is extremely corrosion resistant and holds its edge for a long time. For you, that means less sharpening and fewer worries when Hamburg serves up its usual drizzle. Small or Large? The Large has a 9.2 cm blade that’s 3.2 mm thick. Open, it measures 21.2 cm and tips the scales at 133 g. A full-grown work knife that still won’t hang in your pocket like a brick. The Small comes in at 7.5 cm of blade with 3.0 mm stock, measures 17.5 cm open and weighs 85 g. In the EDC world, it’s been a benchmark for years, and for good reason. Depending on availability, you can choose between a drop point and a tanto blade. Then there’s the Insingo with its long, almost straight edge, which pays off if you do a lot of draw cuts. In the end, the Sebenza 31 is a knife you don’t have to think about for long. You slip it into your pocket in the morning, it does its job, and in the evening it lies on the table just as precise as on day one. That’s really all you want from a folder.

Legal to carry in Germany (§42a) — compliant straight from the factory, and your CRK lifetime warranty stays intact Lug insert instead of thumb pin — flat disc in matching blue tone, same look, different function Plain Jane — the Sebenza 31 in its purest form This is the lug insert version. Instead of a thumb pin, a flat disc in the same blue tone sits where the pin would normally be. That means the knife can't be opened one-handed, making it legal to carry in Germany under §42a — straight out of the box, without voiding your CRK lifetime warranty. Everything else stays as you'd expect: CPM MagnaCut (63-64 HRC), Reeve Integral Lock with ceramic ball interface, bronze pivot washers, offset clip. Made in Boise, Idaho. Available in Large and Small, each in Drop Point, Tanto and Insingo.

The iconic classic in a glass-blasted finish and Lefthand Version Available in Large or SmallReeve Integral Lock with ceramic ball on lockbarBlade Steel: Magnacut Clip Design: Off-set (on the 31, the clip now sits diagonally rather than straight) When in June 2019 the end of the Sebenza 21 was proclaimed and with the Sebenza 31 the successor was presented, this message went like a drumbeat through the knife scene. Finally, new introductions of the manufacturer from Idaho are already very rare. If it is then still about the heritage of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.. First, it is noticeable that the hole on the presentation side of the knife is now omitted - something that many Reeve fans have long wished for. The slightly altered angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a range that can hardly be measured, preventing long-term wear at the contact point of the lockbar.. To improve the hand position of the Sebenza once again a little, the recessed grip on the front was ground a little differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can effortlessly tie in with the popular 21 series.. Small or Large? Just like its predecessor, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand placement continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form.  Glassblast vs. SandblastWondering what the difference is between glass-blasted and sandblasted? The glass-blasted finish uses crushed glass, resulting in a finer, tighter grit that is extremely scratch-resistant and smooth, but still retains its grip. Sandblasted, on the other hand, uses sand to create an extra grippy surface that ages with character.

Chris Reeve Sebenza 31 Box Elder available in Large or Small Wood inlay on the front and back Clip sits slightly diagonal on the 31 Of course, in addition to the "Plane Jane", the Sebenza 31 is again available in a model with inlays.  While the rear Wood inlay is more oriented to the inlays of the Inkosis in terms of shape, a new design was chosen for the show side. Instead of having two inlays as before, now one large one was used, which describes a wide arc over the handle of the knife. As is customary with CRK, the inlays on the Sebenza 31 are bonded in such a way that they last virtually forever. In addition to the visual difference, the Wood inlays also provide a somewhat fuller and rounder hand position, which should be interesting especially for use with gloves. Large When the end of the Sebenza 21 was proclaimed in June 2019 and the successor, the Sebenza 31, was presented, this announcement went through the knife scene like a drumbeat. After all, new introductions from the manufacturer from Idaho are already very rare. When it comes to the inheritance of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model. First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar. In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series. Small Just like the previous model, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Accessories: Chris Reeve Clip Insert and ScrewChris Reeve BackspacerChris Reeve Body Screw KitChris Reeve Pocket ClipChris Reeve GreaseChris Reeve Body ScrewChris Reeve Lanyard classic for Sabenza and UmnumzaanLanyard Pin

Chris Reeve Sebenza Micarta Natural – Glass Blasted Premium Glass-Blasted Finish with natural Micarta inlays Glass Blasted vs. Sandblasted Wondering what the difference is between Glass Blasted and Sandblasted? The Glass Blasted finish uses crushed glass, resulting in a finer, tighter texture that’s highly scratch-resistant and silky smooth — yet still offers plenty of grip. Sandblasted finishes, on the other hand, use sand to create a rougher, more tactile surface that develops character over time.

"Sebenza" means work in Zulu — and that is exactly the standard Chris Reeve Knives has upheld for over 30 years. The Sebenza 31 is not simply a new model; it is the sum of decades of experience, the tightest manufacturing tolerances in the industry, and direct feedback from a worldwide community of knife enthusiasts. With the black Canvas Micarta inlays, the Sebenza 31 takes on a character that goes well beyond the classic Plain Jane version. Micarta That Lasts Both the front and back of the sandblasted titanium handle are fitted with premium black Canvas Micarta inlays. The design on the show side was completely rethought for the 31: a single, generously curved inlay now spans the entire handle — visually clean, exceptionally tactile. Bonded to CRK's exacting standard, the inlays are built to last virtually forever. The black Micarta contrasts sharply against the matte titanium, giving the knife a focused, no-nonsense look. What matters most in daily use: the inlays noticeably improve grip security — even with gloves on. CPM MagnaCut — The Best Steel for Everyday Use The blade is crafted from CPM MagnaCut steel, hardened to 63–64 HRC. That means exceptional edge retention, outstanding toughness, and excellent corrosion resistance — a combination rarely achieved at this level. The hollow grind delivers a thin, high-performance cutting edge, while the stonewash finish minimises visible wear and adds an extra layer of corrosion protection. Ceramic Ball Interface — Built to Last a Lifetime A ceramic ball embedded in the lock bar presses against the blade tang. The extreme hardness of the ceramic reduces wear at the contact point to a negligible level — meaning the lock-up stays just as crisp and precise after years of use as it does on day one. This is the legendary "bank vault" feel that has made CRK knives famous the world over. The Details That Make the Difference The hole in the handle scale of the Sebenza 21 is gone — a long-standing wish of the Reeve community, finally answered. The pocket clip now sits at a slight diagonal and no longer presses against the lock bar. The reworked thumb ramp on the front scale provides an even more natural hand position. Small refinements, significant impact in everyday carry. Large or Small — The Right Fit for Everyone The Large Sebenza 31 (blade length 3.6", weight 4.7 oz) is a fully capable working knife that makes no compromises. The Small Sebenza 31 (blade length 2.99", weight 3.0 oz) remains the king of EDC pocket knives — compact enough for any pocket, capable enough for any task. Made in Boise, Idaho — USA Every Sebenza is handcrafted at the Chris Reeve Knives facility in Boise, Idaho. Not a marketing claim — a living tradition since 1984.

The iconic classic in a glass-blasted finish. Available in Large or SmallReeve Integral Lock with ceramic ball on lockbarBlade Steel: Magnacut Clip Design: Off-set (on the 31, the clip now sits diagonally rather than straight) When in June 2019 the end of the Sebenza 21 was proclaimed and with the Sebenza 31 the successor was presented, this message went like a drumbeat through the knife scene. Finally, new introductions of the manufacturer from Idaho are already very rare. If it is then still about the heritage of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.. First, it is noticeable that the hole on the presentation side of the knife is now omitted - something that many Reeve fans have long wished for. The slightly altered angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a range that can hardly be measured, preventing long-term wear at the contact point of the lockbar.. To improve the hand position of the Sebenza once again a little, the recessed grip on the front was ground a little differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can effortlessly tie in with the popular 21 series.. Small or Large? Just like its predecessor, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand placement continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form.  Glassblast vs. SandblastWondering what the difference is between glass-blasted and sandblasted? The glass-blasted finish uses crushed glass, resulting in a finer, tighter grit that is extremely scratch-resistant and smooth, but still retains its grip. Sandblasted, on the other hand, uses sand to create an extra grippy surface that ages with character.

Chris Reeve Sebenza Tanto Micarta Schwarz Glass Blasted Premium Glass Blasted Finish with black micarta inlaysChris Reeve is known for the classic, the Sebenza, but the Inkosi is the brand's next evolutionary leap and definitely an eye-catcher! At first glance it may resemble the Sebenza 21, but on closer inspection it turns out to be an advanced and distinct masterpiece!Excellent Design & Advanced TechnologyThanks to two concise finger recesses on the handle, you'll have more control and confidence when working with the knife. Improved lock: the Integral Lock invented by Chris Reeve has been further improved in the Inkosi, so that wear of the titanium is avoided. Novel Grind: The Inkosi comes with a "Large Hollow Grind," a blend of hollow and flat grinds that provides more edge stability.Glass Blasted vs SandblastedWondering what the difference is between Glass Blasted and Sandblasted? The Glass Blasted finish uses crushed glass, resulting in a finer, tighter grain that is extremely scratch resistant and smooth, but still retains its grip. Sandblasted, on the other hand, uses sand to create an extra grippy finish that ages with character.Stable & ReliableWith its oversized blade axis and huge bronze washers, the Inkosi is designed to be extremely stable. So you can use it for really tough cutting tasks without any worries!The Chris Reeve Inkosi Micarta Black with the classy Glass Blasted finish is a super addition to your knife collection and a sturdy tool for all situations.

Chris Reeve Sebenza 31 Macassar Ebony available in Large or Small Wood inlay on the front and back It was a sunny day in Idaho when Chris Reeve Knives decided to discontinue the Sebenza 21, one of their most popular and beloved pocket knives. The knife community was shocked and disappointed. But the visionaries at Chris Reeve Knives (CRK) had already been working on a worthy successor: the Sebenza 31.The new model wasn't just an update of the old Sebenza. It was an embodiment of CRK's values and beliefs that had been honed over the years. The new inlays on the front were proof of that. The wooden back inlay was reminiscent of the Inkosi model, while the large inlay on the show side described a wide arc over the handle of the knife. It was a work of art that ergonomically hugged the hand and made the heart race.  But that wasn't all. The revised closure with the ceramic ball was a new technology. The hardness of that ball was in an almost unmeasurable range, preventing long-term wear and tear. And the absence of the hole on the presentation side of the knife and the adjusted pocket clip were further proof that CRK had perfected the Sebenza 31 down to the smallest detail. But the most important thing was that the Sebenza 31 continued to embody CRK's values and beliefs. It was a knife built for eternity, a knife that would serve you faithfully and master the adventures and challenges of life with you. Whether large or small, the Sebenza was and is a faithful companion that never disappoints. And so the Sebenza 31 will continue to dominate the knife community and capture the hearts of its owners. Because at CRK, it's not just about knives. It's about art, technology, and the beauty of craftsmanship.

Sebenza 31 with Natural Micarta Inlay available in Large (S35VN) or Small (S45VN) Micarta inlay on the front and back Clip sits slightly diagonal on the 31 Of course, in addition to the "Plane Jane", the Sebenza 31 is again available in a model with inlays. Two versions are currently available, one with Black Canvas Micarta and the variant presented here in Natural Micarta. While the rear Micarta inlay is more oriented to the inlays of the Inkosis in terms of shape, a new design was chosen for the show side. Instead of having two inlays as before, now one large one was used, which describes a wide arc over the handle of the knife. As is customary with CRK, the inlays on the Sebenza 31 are bonded in such a way that they last virtually forever. In addition to the visual difference, the Micarta inlays also provide a somewhat fuller and rounder hand position, which should be interesting especially for use with gloves. Large When the end of the Sebenza 21 was proclaimed in June 2019 and the successor, the Sebenza 31, was presented, this announcement went through the knife scene like a drumbeat. After all, new introductions from the manufacturer from Idaho are already very rare. When it comes to the inheritance of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model. First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar. In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series. Small Just like the previous model, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Accessories: Chris Reeve Clip Insert and Screw Chris Reeve Backspacer Chris Reeve Body Screw Kit Chris Reeve Pocket Clip Chris Reeve Grease Chris Reeve Body Screw Chris Reeve Lanyard classic for Sabenza and Umnumzaan Lanyard Pin

Chris Reeve Sebenza 31 Bog Oak available in Large or Small Wood inlay on the front and back Clip sits slightly diagonal on the 31 Of course, in addition to the "Plane Jane", the Sebenza 31 is again available in a model with inlays.  While the rear Wood inlay is more oriented to the inlays of the Inkosis in terms of shape, a new design was chosen for the show side. Instead of having two inlays as before, now one large one was used, which describes a wide arc over the handle of the knife. As is customary with CRK, the inlays on the Sebenza 31 are bonded in such a way that they last virtually forever. In addition to the visual difference, the Wood inlays also provide a somewhat fuller and rounder hand position, which should be interesting especially for use with gloves. Large When the end of the Sebenza 21 was proclaimed in June 2019 and the successor, the Sebenza 31, was presented, this announcement went through the knife scene like a drumbeat. After all, new introductions from the manufacturer from Idaho are already very rare. When it comes to the inheritance of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model. First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar. In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series. Small Just like the previous model, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Accessories: Chris Reeve Clip Insert and ScrewChris Reeve BackspacerChris Reeve Body Screw KitChris Reeve Pocket ClipChris Reeve GreaseChris Reeve Body ScrewChris Reeve Lanyard classic for Sabenza and UmnumzaanLanyard Pin

Chris Reeve Inkosi Micarta Black Glass BlastedPremium Glass Blasted Finish with double lugswith black micarta inlaysChris Reeve is known for the classic, the Sebenza, but the Inkosi is the brand's next evolutionary leap and definitely an eye-catcher! At first glance it may resemble the Sebenza 21, but on closer inspection it turns out to be an advanced and distinct masterpiece!Excellent Design & Advanced TechnologyThanks to two concise finger recesses on the handle, you'll have more control and confidence when working with the knife. Improved lock: the Integral Lock invented by Chris Reeve has been further improved in the Inkosi, so that wear of the titanium is avoided. Novel Grind: The Inkosi comes with a "Large Hollow Grind," a blend of hollow and flat grinds that provides more edge stability.Glass Blasted vs SandblastedWondering what the difference is between Glass Blasted and Sandblasted? The Glass Blasted finish uses crushed glass, resulting in a finer, tighter grain that is extremely scratch resistant and smooth, but still retains its grip. Sandblasted, on the other hand, uses sand to create an extra grippy finish that ages with character.Stable & ReliableWith its oversized blade axis and huge bronze washers, the Inkosi is designed to be extremely stable. So you can use it for really tough cutting tasks without any worries!The Chris Reeve Inkosi Micarta Black with the classy Glass Blasted finish is a super addition to your knife collection and a sturdy tool for all situations.

Special feature: with thumb stud on both sides  CPM MagncutMicarta inlay on the front and back 

Chris Reeve Impinda Slipjoint The Impinda is almost a sensation for fans of the Chris Reeve Knives brand. This is mainly due to the fact that the cycles in which Reeve introduce new models can be very long - sometimes we are talking about decades. Now the Impinda is a brand new model on the market, which was designed by Tim Reeve together with knife legend Bill Harsey. The two use the usual design language of the manufacturer and deliver a model that fits seamlessly into the product line of Chris Reeve. By the way, the prototype of this model was a Slipjoint that Harsey built for his son when he started his job at NASA. The great thing about the Impinda is that because the blade is not locked, you can carry this knife with you every day perfectly legally. What's interesting is that while the knife is relatively easy to open, you have to apply significantly more pressure to close it. This is due to the special back spring, which is made of CPM S35VN steel just like the blade. Here it takes about 2.5 Kg of pressure to close the knife again, which ensures safe working. As usual with Reeve, the blade runs on large bronze washers, which allows the blade to run silky smooth. Thanks to the hollow grind, the Impinda proves to be highly cutting and once again shows that Chris Reeve Knives is all about knife performance. Together with the newly designed titanium pocket clip, the Impinda is an all-around cutting tool for those looking for an unlocked pocket knife of the highest manufacturing quality. Bill Harsey - The old school William "Bill" Harsey is a true original of the US knifemaking scene. Born in Oregon in 1955, Harsey has worked with companies such as CRKT, Gerber and Spartan Blades, among others, and is considered one of the most renowned knife makers in the world.Especially his combat knives for the Army Special Forces and the collaboration with Chris Reeve on models such as the "Green Baret" released in 2003 or the "Pacific" from 2007, achieved great fame. Accessories: Chris Reeve replacement clip for Impinda Chris Reeve Body Screw KitChris Reeve Grease

Chris Reeve Inkosi Micarta Natural Glass BlastedPremium Glass Blasted Finish with natural micarta inlaysChris Reeve is known for the classic, the Sebenza, but the Inkosi is the brand's next evolutionary leap and definitely an eye-catcher! At first glance it may resemble the Sebenza 21, but on closer inspection it turns out to be an advanced and distinct masterpiece!Excellent Design & Advanced TechnologyThanks to two concise finger recesses on the handle, you'll have more control and confidence when working with the knife. Improved lock: the Integral Lock invented by Chris Reeve has been further improved in the Inkosi, so that wear of the titanium is avoided. Novel Grind: The Inkosi comes with a "Large Hollow Grind," a blend of hollow and flat grinds that provides more edge stability.Glass Blasted vs SandblastedWondering what the difference is between Glass Blasted and Sandblasted? The Glass Blasted finish uses crushed glass, resulting in a finer, tighter grain that is extremely scratch resistant and smooth, but still retains its grip. Sandblasted, on the other hand, uses sand to create an extra grippy finish that ages with character.Stable & ReliableWith its oversized blade axis and huge bronze washers, the Inkosi is designed to be extremely stable. So you can use it for really tough cutting tasks without any worries!The Chris Reeve Inkosi Micarta Black with the classy Glass Blasted finish is a super addition to your knife collection and a sturdy tool for all situations.

Chris Reeve Sebenza 31 Box Elder Lefthanded Lefthand Version of the Sebenza 31available in Large or Small Wood inlay on the front and back Clip sits slightly diagonal on the 31

Premium Glass Blasted Finish Chris Reeve is known for the classic, the Sebenza, but the Inkosi is the brand's next evolutionary leap and definitely an eye-catcher! At first glance it may resemble the Sebenza 21, but on closer inspection it turns out to be an advanced and distinct masterpiece!Excellent Design & Advanced TechnologyThanks to two concise finger recesses on the handle, you'll have more control and confidence when working with the knife. Improved lock: the Integral Lock invented by Chris Reeve has been further improved in the Inkosi, so that wear of the titanium is avoided. Novel Grind: The Inkosi comes with a "Large Hollow Grind," a blend of hollow and flat grinds that provides more edge stability.Glass Blasted vs SandblastedWondering what the difference is between Glass Blasted and Sandblasted? The Glass Blasted finish uses crushed glass, resulting in a finer, tighter grain that is extremely scratch resistant and smooth, but still retains its grip. Sandblasted, on the other hand, uses sand to create an extra grippy finish that ages with character.Stable & ReliableWith its oversized blade axis and huge bronze washers, the Inkosi is designed to be extremely stable. So you can use it for really tough cutting tasks without any worries!The Chris Reeve Inkosi Micarta Black with the classy Glass Blasted finish is a super addition to your knife collection and a sturdy tool for all situations.

Chris Reeve Inkosi Droppoint Small Inkosi with new S45VN steel Compact EDC knife InkosiChris Reeve's classic is clearly the Sebenza - but with the Inkosi, the manufacturer takes the next logical step. While these knives may look quite similar at first glance, on closer inspection the Inkosi turns out to be an independent and progressive knife, which in no way needs to shy away from comparison with the Sebenza 21. The most striking innovation can be found on the handle. Here are two pronounced finger recesses that give your hand a more secure grip when working with the knife and give you more control in the cutting movement. The lock is still the Integral Lock invented by Chris Reeve, which has been improved by a decisive detail in the Inkosi. In order to prevent the softer titanium from coming into direct contact with the blade's hardened CMP S45VN steel, the detent ball (which is made of an extremely hard ceramic) was placed in such a way that it also serves as a contact point for the lock. This eliminates the possibility of wear and tear on the titanium. Another innovation is the grinding of the blade. Where Reeve has almost always relied on a hollow grind in the past, you'll now find a mixture of hollow and flat grinds used on the Inkosi, which the manufacturer calls "Large Hollow Grind" and which is supposed to provide more stability to the cutting edge. Together with the oversized blade axis and the huge bronze washers, the Inkosi turns out to be an incredibly stable knife that you can also use for really tough cutting tasks. SmallSmall hands? Little space in your pocket? Not in the mood for a big titanium folder? Then the small version of the Inkosi is the solution for you. Just like the Sebenza, the Inkosi is available in two different sizes and the small version is also a full-fledged and highly functional pocket knife, which does not have to hide from the large version in the slightest. Quite the opposite: especially in urban everyday life, many prefer a somewhat more compact knife for everyday cutting tasks. Only if you have very large hands (glove size 10 and up) do you perhaps prefer the large version of the Inkosis. In direct comparison with the Sebenza 31 Small, the Inkosi Small is about 1cm shorter. DropointThe classic Reeve blade shape as it has been produced for 30 years now. Works wonderfully in almost all areas and is very cutting thanks to the hollow grind. Accessories: Chris Reeve Clip Insert and Screw Chris Reeve Backspacer Chris Reeve Body Screw Kit Chris Reeve Pocket Clip Chris Reeve Grease Chris Reeve Inkosio Lanyard with Bead Chris Reeve Body Screw

with thumb stud on both sides Titanium Surface with fine glass blast finish Reeve Integral Lock with ceramic ball on lockbar Blade steel: Magnacut

Chris Reeve Mnandi Bog Oak Chris Reeve Mnandi - Pure elegance The Chris Reeve Mnandi bears its name not without reason: translated into English, "Mnandi" means something like "pretty" or "beautiful". But this knife is not just a nice looking accessory - despite its small size you get here a full-fledged and very versatile pocket knife. Like all almost Chris Reeve knives, the Mnandi is equipped with the Integral Lock, which neatly locks the blade when open. Above the two titanium scales is the real highlight of this little gentleman folder: the handle inlays made of stabilized precious wood are a total eye-catcher. The wood pieces have been sanded to seamlessly embed themselves into the titanium, making the Mnandi a real pleasure to hold. Despite its short length, this small men's knife does great in everyday use and is an absolutely serious cutting tool. The pocket clip, decorated with Art Deco elements, reminds a bit of an old tie pin and again underlines the noble look of the Mnandi. Alternatively, you can carry your Mnandi in the included leather pouch. On some days, a large, tactical-looking titanium folder may not be the right thing. This is exactly where the Mnandi makes its grand entrance.Whether with a suit, sports jacket or casual summer outfit, the Chris Reeve Mnandi is a companion that is both a handsome accessory and a functional cutting tool.

Chris Reeve Inkosi Micarta Black Small Inkosi with new S45VN steel  Compact EDC Knife. Inkosi The classic from Chris Reeve is clearly the Sebenza  - but with the Inkosi the manufacturer takes the next logical step. May these knives at first glance still look quite similar, so the Inkosi turns out on closer inspection as an independent and advanced knife, which needs to shy away from the comparison before the Sebenza 21 in no way.. The most striking innovation can be found on the handle. Here are two pronounced finger recesses, which give your hand when working with the knife a safer grip and give you more control in the cutting movement. The lock is still the Chris Reeve invented Integral Lock, but in the Inkosi it has been improved by a crucial detail. To prevent the softer titanium from coming into direct contact with the hardened CMP S45VN steel of the blade, the detent ball (which is made of an extremely hard ceramic ) was placed in such a way that it also serves as the contact point of the lock technology. In this way, wear of the titanium can be ruled out. Another innovation is the sharpening of the blade. Where Reeve so far almost always relied on a hollow grind, you will find the Inkosi now a mixture of hollow and flat grind to use, which the manufacturer "Large Hollow Grind" calls and which is intended to provide more stability of the edge. Together with the oversized blade axis and the giant bronze washers, the Inkosi turns out to be an incredibly sturdily constructed knife that you can also use for really tough cutting tasks at times. Small Small hands? Little space in your pocket? Not in the mood for a big titanium folder? Then the Small version of the Inkosi is the solution for you. Just like the Sebenza, the Inkosi is available in two different sizes and, again, the small version is a full-featured and highly functional pocket knife that doesn't have to hide from the large version in the slightest.. Quite the opposite: especially in urban everyday life, many prefer a somewhat more compact knife for everyday cutting tasks. Only with very large hands (glove size 10 upwards), perhaps rather the large version of the Inkosis is recommended. In direct comparison with the Sebenza 31 Small, the Inkosi Small is about 1cm shorter.  Dropoint The classic Reeve blade shape as it has been produced for 30 years now. Works wonderfully in just about anything and is very easy to cut thanks to the hollow grind..

Chris Reeve Inkosi Micarta Natural S45-VN steel Robust working knife Ceramic Ball Interface Lock The classic from Chris Reeve is clearly the Sebenza - but with the Inkosi the manufacturer takes the next logical step. These knives may look quite similar at first glance, but on closer inspection the Inkosi turns out to be an independent and progressive knife, which in no way needs to shy away from comparison with the Sebenza 21. The most striking innovation can be found on the handle. Here are two pronounced finger recesses that give your hand a more secure grip when working with the knife and give you more control in the cutting movement. The lock is still the Integral Lock invented by Chris Reeve, which has been improved by a decisive detail in the Inkosi. In order to prevent the softer titanium from coming into direct contact with the blade's hardened CMP S45VN steel, the detent ball (which is made of an extremely hard ceramic) was placed in such a way that it also serves as a contact point for the lock. This eliminates the possibility of wear and tear on the titanium. Another innovation is the grinding of the blade. Where Reeve has almost always relied on a hollow grind in the past, you'll now find a mixture of hollow and flat grinds used on the Inkosi, which the manufacturer calls "Large Hollow Grind" and which is supposed to provide more stability to the cutting edge. Together with the oversized blade axis and the huge bronze washers, the Inkosi turns out to be an incredibly sturdily constructed knife that you can also use for really tough cutting tasks. InlayTo add a bit more grip, Micarta inlays have been added to the handle of this version. Micarta is a material invented in the 50s, which was mainly used in the furniture industry. If the knife gets dirty after use, it can be easily cleaned with a little soapy water.

Chris Reeve Large Inkosi TantoThe Inkosi from the house of Chris Reeve, the Integral Lock was further developed and also the design compared to the Sebenza 21 was slightly changed. Not many knife manufacturers enjoy such a high reputation as the family business based in Idaho.There is probably hardly any other knife which delivers a similarly high level of quality over decades. Accessories: Chris Reeve Clip Insert and Screw Chris Reeve Backspacer Chris Reeve Body Screw Kit Chris Reeve pocket clip Chris Reeve Grease Chris Reeve Inkosio Lanyard with Bead Chris Reeve Body Screw