Knives & Accessories

Victorinox Swiss Tool Spirit Clip  Clever pocket size carrying clip Made of stainless steel Made in Switzerland Noble design in silver or black Technical data: Height: 19mm Length: 59mm Weight: 6g

Victorinox replacement Toothpick Large for 85 mm, 91 mm, 110 mm and 130 mm models made of robust plastic available in 5 colors  the color white is the classic toothpick Technical data: Hight: 3,7 mm Length: 50 mm Weight: 0,2 Gramm Material: Kunststoff

Böker Plus Nessmi Pro Black Jesper Voxnaes Design outdoor & everyday knife more compact version of the Nessmuk knife with leather sheath

Wasabi utility knife Blade length: 6.0" (15.0 cm)Handle length: 12.6 cmBlade material: Polished stainless steelGrind: Double sidedHandle material: Antiseptic bamboo-polypropylene combinationBlade hardness: 58±1 HRC Utility knife for meat and vegetables. Wasabi Black - polished blade, black handle: developed in Japan, with a stainless polished steel blade with 58±1 HRC hardness, these knives will give your kitchen a distinctive, Far Eastern flair. For the Wasabi range, a handle was developed whose special combination of bamboo powder and polyphropylene offers optimal hygiene - also due to the naturally antibacterial effect of the bamboo components. In contrast to the traditional Japanese wooden handle, the black handle is not plugged, but completely encloses the blade, so that the blade is firmly connected to the handle and, on the other hand, no dirt is deposited - commercial kitchen suitability guaranteed.

Windmill Paring knife small This paring knife belongs to the absolute classics of Windmühlen knives, quite classically also the handle in red beech.The knife exists for more than 80 years and many know it from "grandma's kitchen drawer". Traditionally ground according to the "Solingen thin grind" and "finely skewered" by hand. Technical data:Handle: copper beechRivets: AluminumBlade: stainless or carbon steelSurface: fine grainedBlade length: approx. 6,25 cm / 3,25 inchTotal length: approx. 185 mm

Victorinox Swiss Tool Clip Clever pocket size carrying clip Made of stainless steel Made in Switzerland Noble design in silver or black Technical data: Height: 15mm Length: 59mm Weight: 7g

Children's knife Opinel stainless The children's knife from Opinel has a rounded blade made of stainless steel and was combined with a wooden handle. As usual with Opinel knives, of course, is not missing the locking ring that securely locks the blade in the unfolded state and after folding, prevents unintentional opening.

Victorinox leather case Belt pouch with belt loop and velcro closure. Made of leatherfor Swiss Tool or large pocket kniveswith belt loopVelcro fastener length: 40 mmheight: 123 mmWeight 42 g

Swiss Army Octopus Blademaster DeLuxe from Cooper Customs Titanium grip scales by Daily Customs Engraved by Florian Güllert Timascus Inlay Blademaster DeLuxe Octopus Cooper Custom in collaboration with engraver Florian Güllert have once again delivered a true work of art. The Blademaster DeLuxe Octopus is an absolute masterpiece! A Victorinox XLT, a Tinker and a Compact served as the basis for this special model. The three completely different blades are a nod to the versatility of the oldest tool in human history. In addition, there are scissors, the Philips screwdriver, as well as a cap lifter and a small slotted screwdriver. The Cooper custom logo has been laser engraved on the large blade. The handle scales (model 91.1) are from Daily Customs in Hamburg and were engraved both by machine and by hand by Florian Güllert. Florian is one of the most sought-after engravers in Europe and provides some breathtaking insights into his work on his Instagram account. The engraving shows an octopus moving through the sea with enchanting elegance, its shape wonderfully adapted to the contour of the handle scales. Another special feature is hidden in the type of engraving: to give the motif a special depth, Florian Güllert has chosen three different levels on which the material was processed. This makes the knife not only visually but also haptically an experience. The basic engraving was done by machine, which does not mean that a standardized CNC or laser process was used here. The subsequent details were all engraved by hand, which requires an incredibly precise eye and a lot of experience. Charging in different shades of blue, the Timascus inlay looks as if it were a window into the depths of the ocean and completes the motif perfectly. Like all Cooper Custom models, the Blademaster DeLuxe Octopus is assembled and finished entirely by hand.

Urban EDC F5.5 G10 Designed by Jesper Voxnaes based on the Custom Vox F5 Sheepfoot blade flat ground cutting edge Blackout Blade and Hardware The Voxnaes DNA The F5.5 is unmistakably a Jesper Voxnaes design. The sober, unagitated nature of his knives is as distinctive as it is elegant. The F5.5 exudes a certain calm and balance that make it so universally applicable. Thanks to its recessed grip and otherwise rather neutral shape, the handle is comfortable to grasp for almost any hand size. The hand position is simply good. If you want to work very precisely, you can also pre-grip the F5.5 thanks to the small choil in the blade, so that even fine cuts go smoothly from the hand. By the way, the lock on the F5.5 is a liner lock, which locks the knife bombproof. You simply open the blade via the thumb hole, which is very easy thanks to the ball bearings.  In case you were wondering, yes, the F5.5 is based on Jesper Voxnae's legendary and extremely rare F5 model. 

Butter hump knife olive Attention: this is the butter knife, which is smaller than the classic hunchback knife! Butter knife with 70 mm humpback blade. Handle: olive

Wasabi Ham Knife Blade length: 9.0" (23.0 cm)Handle length: 12.6 cmBlade material: Polished stainless steelGrind: Double sidedHandle Material: Antiseptic Bamboo-Polypropylene Combination

Windmill Paring knife small cherry carbon steel or stainless very thinly ground and therefore very sharp since over 80 years THE classic in the kitchen technical datahandle: cherryRivets: AluminumBlade: stainlessSurface: finely piercedblade length: ca. 6,5 cm / 2,5 inchOverall length: approx. 17 cm

Böker Tiger Damascus collectors knife with historical past with armor parts from a Tiger I Overall shape of the knife: homage to the famous lines of the tank blade axle screw: main drive sprocket imitated Blade made of mosaic damascus (forged by hand by Chad Nichols in the pattern Intrepid) handmade in the Böker knife manufactory Solingen with noble floating display, certificate of authenticity and individual serial number

Victorinox Mini Tool Set Set contains 4 Mini Tools in different colors and functions Made in Switzerland To screw into the corkscrew for your Swiss Army Knife Farbe Werkzeug: Wofür (Beispiel) white/grey Mini slot for eyeglass frames green Mini cross (Phillips 000) Elektronic parts blue Torx T4 Elektronic parts red Pin To change the sim card

Higo Hoseki Damascus classic japanese pocket knife brass handle Damascus blade

Back point cherry large Utility and meat knife back point with handle steamed cherry. Blade stainless blue pierced. Blade length: 182 mm Hand-blued knives are extremely rare today. The fine smooth surface of the back point blade goes through the food particularly easily, even with the hardest sausage or vegetables, such as carrots and celery. The discreet pointing to the back of the blade makes this knife ideal for cutting on the board, because you can roll with it.

Böker Barlow M4 Sherman-Damascus striking drop shape inspired by the English pocket knives of the 17th century blade made of different materials from the production of M4 Sherman tanks the damascus of 80 layers is reminiscent of tank tracks(forged by hand by Chad Nichols in the pattern Customized Ladder) with high quality felt case for storage, certificate of authenticity and individual serial number Handmade in the Böker knife manufactory Solingen

Victorinox Tinker With this small "officer's knife" you always have the right tool at hand. Color: Red Size:(LxWxH) : 91 x 26 x 14 mm Tools: Large blade Small blade Can opener with -small screwdriver Punch-drill-sewer Phillips screwdriver Ring, inox Toothpick Tweezers Cap lifter with -screwdriver -wire stripper.

Scissors Phillips screwdriver Bottle OpenerWire stripperTweezers Toothpick

Otter Three Rivet Knife Choice of traditional non-stainless carbon steel blade or stainless steel blade Handle material: smoked oak SlipJoint Handmade in Solingen Traditional and popular pocket knife with eye-catching brass rosettes in the handle. The selected bubinga wood handle scales harmonize perfectly with the three polished brass rivets and give the knife a noble elegance.

Opinel No 10 bottle opener Opinel knife No. 10 with integrated bottle opener & corkscrew  Beech wood handle stainless steel blade

Lederscheide für Heidi Blacksmith "Kwaidi" Schaidi Wenn du nicht so ein großes Freund von Kydex Scheiden bist oder den neues Heidi Blacksmith Kwaidi lieber in einer edlen Lederscheide tragen möchtest, haben wir da etwas für dich. Zusammen mit Daniel von dp_steelandleather haben wir uns die „Schaidi“ ausgedacht: eine ultra kompakte, sehr hübsche Lederscheide, die passgenau für die Midtech Kwaidis angefertigt wurde und exklusiv bei uns erhältlich ist. Mit dem Clip kannst du dein Kwaidi ganz einfach an der Innenseite deiner Hose „anclippen“. Natürlich wird auch die Schaidi in Handarbeit von Daniel in seiner kleinen Werkstatt aus bestem Leder genäht. Erhältlich in folgenden Farben: schwarz, dunkelbraun, buttero

Kai Shun Minamo Santoku The Shun Minamo series joins the premium class of kai knife series as an elegant understatement. Here the Japanese and the European are artfully combined. Tim Mälzer had the idea to develop a combination of the typical Japanese Santoku knife and the classic European chef's knife. This fusion was considered the basis for the three blade shapes. The series is defined by a clear design language. A black handle in combination with the specially designed blade, which is evenly interspersed with a fine damask grain, make each knife look like a unique piece. The name of the series comes from this fine grain, which is reminiscent of a water surface (jap. Minamo) in the rain. The blade construction of hard core, sheathed in more flexible Damascus steel, ensures maximum sharpness, long edge retention and ideal performance. Hardness 60 (±1) HRCBlade length: 7", 18 cmHandle length 12 cm