Lynch Open Door Policy "ODP" v1.0 Prybar - Blue sturdy EDC Prybar made of titanium with Lynch Deepcarry clip Technical Specifications: Total length: 11.6 cm 4.56" Total width: 2,3 cm 0.91" Material: 6AL-4V Titanium
Lynch All Access Pass V1.7 "Double Wing" Prybar - Bronze sturdy EDC Prybar and bottle opener made of titanium with Lynch Deepcarry clip Gold standart in the world of bottle openers Casey Lynch has created some serious hype in the gear and knife community with the All Access Pass Prybars. Hard to get and extremely popular! These handy pocket-sized pry bars are not only great for prying, screwing, scraping and anything else a knife blade is too delicate for. Also beer and of course all other drinks with crown caps can be opened with the cap lifter with ease. Completely milled from one piece of the highest quality 6AL-4V titanium and the typical Lynch Deep Carry Clip. All Lynch tools are indidually hand finished. 100% Made in America Technical Specifications: Total length: 10,2 cm 4" Total width: 2,3 cm 0.9" Material: 6AL-4V Titanium
Lynch All Access Pass V2.7X "Double Wing" Prybar - Bronze sturdy EDC Prybar and bottle opener made of titanium with Lynch Deepcarry clip Gold standart in the world of bottle openers Casey Lynch has created some serious hype in the gear and knife community with the All Access Pass Prybars. Hard to get and extremely popular! These handy pocket-sized pry bars are not only great for prying, screwing, scraping and anything else a knife blade is too delicate for. Also beer and of course all other drinks with crown caps can be opened with the cap lifter with ease. Completely milled from one piece of the highest quality 6AL-4V titanium and the typical Lynch Deep Carry Clip. All Lynch tools are indidually hand finished. 100% Made in America Technical Specifications: Total length: 10,4 cm 4.1" Total width: 3,3 cm 0.92" Material: 6AL-4V Titanium
Lynch All Access Pass V1.8 "Ultralight" Prybar - Blue sturdy EDC Prybar and bottle opener made of titanium with Lynch Deepcarry clip Gold standart in the world of bottle openers Casey Lynch has created some serious hype in the gear and knife community with the All Access Pass Prybars. Hard to get and extremely popular! These handy pocket-sized pry bars are not only great for prying, screwing, scraping and anything else a knife blade is too delicate for. Also beer and of course all other drinks with crown caps can be opened with the cap lifter with ease. Completely milled from one piece of the highest quality 6AL-4V titanium and the typical Lynch Deep Carry Clip. All Lynch tools are indidually hand finished. 100% Made in America Technical Specifications: Total length: 10,2 cm 4" Total width: 2,3 cm 0.9" Material: 6AL-4V Titanium Finish: Black Ceracote
LionSteel Eggie MultitoolTool for your key ring inside Eggie are 3 Torx bits, 1 Schliz screwdriver, 1 glass cutter and 1 glass breaker (made of steel) the tools are also held in position inside with a magnet Eggie itself is made of titanium
LionSteel Eggie MultitoolTool for your key ring inside Eggie are 3 Torx bits, 1 Schliz screwdriver, 1 glass cutter and 1 glass breaker (made of steel) the tools are also held in position inside with a magnet Eggie itself is made of titanium
LionSteel Eggie MultitoolTool for your key ring inside Eggie are 3 Torx bits, 1 Schliz screwdriver, 1 glass cutter and 1 glass breaker (made of steel) the tools are also held in position inside with a magnet Eggie itself is made of titanium
Vero Fulcrum Mini
made of titanium
with clip and micro bits
Mini Verison
If it gets stuck...
Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose?
Thats a job for Joseph Vero!
(Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade.
Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time.
By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold.
Included are 4 micro bits:1 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.
Technical specifications:
Total length:
9 cm
Width:
1.5 cm
Material:
titanium
Weight:
29 g (2 Bits loaded)
Finish:
Raw
Accessories:
Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings
Vero Fulcrum Mini Blackwash
made of titanium
with clip and micro bits
Mini Verison
Blackwash Finish
If it gets stuck...
Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose?
Thats a job for Joseph Vero!
(Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade.
Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time.
By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold.
Included are 4 micro bits:1 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.
Technical specifications:
Total length:
9 cm
Width:
1.5 cm
Material:
titanium
Weight:
29 g (2 Bits loaded)
Finish:
Blackwash
Accessories:
Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings
GiantMouse – Morbid Mouse Mini Zirkonium
The slightly different pocket tool
Zirkonium
Made in USA
What is cooler than a bottle opener?
Exactly: a bottle opener from GiantMouse. Here comes the new, slightly smaller version of the Morbid Mouse after a long wait. This useful little tool is of cause a cap lifter.
To make the Morbid Mouse Mini a real worry stone, all edges are rounded off by hand after milling.
The small mice are manufactured in the USA using the latest CNC technology.
Technical specifications:
Width:
4,6 cm
Height:
4,3 cm
Thickness
6,4 mm
Weight:
40 g
Anso of Denmark MiniBar with Inlay
Perfect for the key ring or as a small pocket tool
made of titanium
made in Denmark by Jens Anso
Small pry bar and bottle opener for your EDC.
Prying is something you really shouldn't do with a knife. Sure: a really sturdy survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you.
Recently, small pry tools have become increasingly popular in the EDC scene - Jens Ansø also has a corresponding tool in his portfolio with the Prybar12. But if this is still too big for you, you are welcome to use the Minibar. No, not THE minibar at a hotel, but the new keychain tool from Ansø. This very handy pry tool is also a cap lifter and is of course manufactured entirely in Jens Ansø's workshop in Denmark. The 5mm thick titanium is first blasted, then stonewashed and finally color anodized.
To match, there is a variety of inlays, which can be changed as desired thanks to the screw connection.
Technical Data:
Length
50 mm
Width
23 mm
Thicknes
5 mm
Material
Titanium
Daily Knives Prybar PryAK Inlay Ti
Prybar from Daily Knives perfect for your AK 1
Micarta inlay interchangeable
Prybar made of titanium
Daily Knives have done it: the first EDC Prybar from Hamburg is here. The PrybAK is a design by Alex Kremer, who has already designed the AK1 knife. As always, the PrybAK is completely milled from titanium, assembled and packaged in Hamburg. The canvas micarta inlay is screwed and can be changed by you according to your taste. The highlight: you can switch between different inlays that are also compatible with your AK1 knife.
In addition, you have thanks to the lanyard eyelet to attach a bead of your wall.
Dimensions:
Length 10.6 cmwidth 1,50 cmheight 0,6 cm
Anso Prybar12 Titanium Kobolt Finish With Orange G10 Inlay
pocket pry bar
and bottle opener
made of titanium
Kobolt finish
orange g10 inlay
It´s twelve o'clock in New Zealand...
Prying is something you really shouldn't do with a knife. Sure: a really sturdy full tang survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you.
Therefore, small pry tools have recently become more and more popular in the EDC community. Now there is also is such a mini pry bar from Jens Ansø. With its 10 cm the Prybar12 is still compact enough that it could still be attached to the keychain without bothering the user. Those who prefer to carry the Prybar12 in their pocket can do so with the integral pocket clip.
Like all Ansø tools, the Prybar12 is completely manufactured in his workshop in Denmark. The titanium is first blasted, then stonewashed and finally color anodized.
By the way, the name of this tool alludes to the saying that its 12 o'clock somewhere in the world right now! Cheers!
Technical specifications:
Length:
97 mm
Width:
26 mm
Thickness:
5 mm
Weight:
approx 37 g
Material:
titanium
Finish:
Kobolt
Inlay:
G10, orange
Anso Prybar12 Stonewashed Titanium With Bronze Inlay
pocket pry bar
and bottle opener
made of titanium
stonewashed finish
bronze inlay
It´s twelve o'clock in New Zealand...
Prying is something you really shouldn't do with a knife. Sure: a really sturdy full tang survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you.
Therefore, small pry tools have recently become more and more popular in the EDC community. Now there is also is such a mini pry bar from Jens Ansø. With its 10 cm the Prybar12 is still compact enough that it could still be attached to the keychain without bothering the user. Those who prefer to carry the Prybar12 in their pocket can do so with the integral pocket clip.
Like all Ansø tools, the Prybar12 is completely manufactured in his workshop in Denmark. The titanium is first blasted, then stonewashed and finally color anodized.
By the way, the name of this tool alludes to the saying that its 12 o'clock somewhere in the world right now! Cheers!
Technical specifications:
Length:
97 mm
Width:
26 mm
Thickness:
5 mm
Weight:
approx 40 g
Material:
titanium
Finish:
sand blasted and stonewashed
Inlay:
bronze
Jens Anso Knife Tool
Made of Titanium
Ball bearings
Different Colours
Small driver
After years of tinkering and trial and error, Jens Anso has released his first knife tool. The practical, compact bit driver serves as a universal tool to disassemble your pocket knife in a few simple steps, for example, if it needs to be cleaned. In addition, the tool looks great on photos thanks to its tasteful design.
The Bit Driver is made entirely of titanium and offers an optimal hand position thanks to the Frag Pattern. The built-in ball bearings not only ensure a velvety smooth rotation of the driver but also offer you great fun. Fidget factor: very high! The holder for the bits fits the common 1/4" bits - Jens Anso himself prefers to use the screw heads of the traditional manufacturer WIHA from Wuppertal.
For the colors of the knife tool you have the choice between satin, PVD black, stonewashed, Cuprum and Kobolt.
Comes without bits!
Anso of Denmark MiniBar with Metal Inlay
Perfect for the key ring or as a small pocket tool
made of titanium
made in Denmark by Jens Anso
Small pry bar and bottle opener for your EDC.
Prying is something you really shouldn't do with a knife. Sure: a really sturdy survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you.
Recently, small pry tools have become increasingly popular in the EDC scene - Jens Ansø also has a corresponding tool in his portfolio with the Prybar12. But if this is still too big for you, you are welcome to use the Minibar. No, not THE minibar at a hotel, but the new keychain tool from Ansø. This very handy pry tool is also a cap lifter and is of course manufactured entirely in Jens Ansø's workshop in Denmark. The 5mm thick titanium is first blasted, then stonewashed and finally color anodized.
To match, there is a variety of inlays, which can be changed as desired thanks to the screw connection.
Technical Data:
Length
50 mm
Width
23 mm
Thicknes
5 mm
Material
Titanium
Victorinox Swiss Tool Spirit MX Clip
Multifunctional tool with 24 lockable functions
Made in Switzerland
With carrying clip and one-hand opening mechanism
Anso Prybar12 Titanium Stonewashed Finish Without Inlay
pocket pry bar
and bottle opener
made of titanium
stonewashed finish
without inlay
It´s twelve o'clock in New Zealand...
Prying is something you really shouldn't do with a knife. Sure: a really sturdy full tang survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you.
Therefore, small pry tools have recently become more and more popular in the EDC community. Now there is also is such a mini pry bar from Jens Ansø. With its 10 cm the Prybar12 is still compact enough that it could still be attached to the keychain without bothering the user. Those who prefer to carry the Prybar12 in their pocket can do so with the integral pocket clip.
Like all Ansø tools, the Prybar12 is completely manufactured in his workshop in Denmark. The titanium is first blasted, then stonewashed and finally color anodized.
By the way, the name of this tool alludes to the saying that its 12 o'clock somewhere in the world right now! Cheers!
In the version without inlay, no inlays can be installed later due to the lack of internal threads! On the other hand, the milling provides a very good grip and a comfortable handle position.
Technical specifications:
Length:
97 mm
Width:
26 mm
Thickness:
5 mm
Weight:
approx 37 g
Material:
titanium
Finish:
stonewashed
Prybar Titanium Multitool
with clip
Stonewashed Finis
What you can do with it:
pry
open bottles
open packages
Pull nails
mount on your keychain
Dimensions:
Overall length: 12.1 cm
Thickness: 5 mm
Weight: 43 g
