Prybars & Tools

Hinderer XM Armorers Tool Schräubchen locker? Wer kennt es nicht: den ganzen Abend lang das Messer auf der Couch bespielt oder am Wochenende mal wieder eine Panzertür aufgehebelt und nun wackelt die Klinge? Kein Problem. Für die XM-18 3.5“ Modelle (Achtung, passt nicht für die kleineren 3“ Modelle) haben wir nun das Armorers Tool von Rick Hinderer im Programm. Hier hast Du neben dem passenden Torx auch einen sogenannten Spanner-Schlüssel, mit dem sich die Achshülse der XM-18 3.5“ und der XM-24 Modelle kontern lässt. Zudem hat das Tool einen exakt passenden Schlitzschraubendreher. Das Armorers Tool ist aus Stahl gefertigt und kann problemlos an deinem Schlüsselbund befestigt werden. Finishes: Beadblasted:      Die Oberfläche wurde Perlgestrahlt und hat einen sehr dezenten Glanz.Working Finish:  Die Oberfläche wird zunächst sandstrahlt und danach noch einmal gestonewashed. Die Oberfläche ist matter als beim Beadblasted Finish.DLC:                   Die Oberfläche hat eine widerstandsfähige DLC Beschichtung

Vero Fulcrum Blackwashed (Full Size Version) Prybar and bit holder made of titanium with clip and micro bits DLC coated and stonewashed If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: Blackwashed Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Anso Prybar12 Stonewashed Titanium With Green Canvas Micarta Inlay  pocket pry bar and bottle opener made of titanium stonewashed finish green canvas Micarta inlay It´s twelve o'clock in New Zealand... Prying is something you really shouldn't do with a knife. Sure: a really sturdy full tang survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you. Therefore, small pry tools have recently become more and more popular in the EDC community. Now there is also is such a mini pry bar from Jens Ansø. With its 10 cm the Prybar12 is still compact enough that it could still be attached to the keychain without bothering the user. Those who prefer to carry the Prybar12 in their pocket can do so with the integral pocket clip. Like all Ansø tools, the Prybar12 is completely manufactured in his workshop in Denmark. The titanium is first blasted, then stonewashed and finally color anodized. By the way, the name of this tool alludes to the saying that its 12 o'clock somewhere in the world right now! Cheers!   Technical specifications: Length:  97 mm Width: 26 mm Thickness:   5 mm Weight: approx 37 g Material: titanium Finish: sand blasted and stonewashed Inlay: Micarta, green

Anso of Denmark MiniBar without Inlay Perfect for the key ring or as a small pocket tool made of titanium made in Denmark by Jens Anso Small pry bar and bottle opener for your EDC.  Prying is something you really shouldn't do with a knife. Sure: a really sturdy survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you. Recently, small pry tools have become increasingly popular in the EDC scene - Jens Ansø also has a corresponding tool in his portfolio with the Prybar12. But if this is still too big for you, you are welcome to use the Minibar. No, not THE minibar at a hotel, but the new keychain tool from Ansø. This very handy pry tool is also a cap lifter and is of course manufactured entirely in Jens Ansø's workshop in Denmark. The 5mm thick titanium is first blasted, then stonewashed and finally color anodized. This version comes without inlay and with milled out space for your thumb. An inlay can not be installed later.   Technical Data: Length 50 mm Width 23 mm Thicknes 5 mm Material Titan

Anso Prybar12 Stonewashed Titanium With Timascus Inlay  pocket pry bar and bottle opener made of titanium stonewashed finish timascus inlay It´s twelve o'clock in New Zealand... Prying is something you really shouldn't do with a knife. Sure: a really sturdy full tang survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you. Therefore, small pry tools have recently become more and more popular in the EDC community. Now there is also is such a mini pry bar from Jens Ansø. With its 10 cm the Prybar12 is still compact enough that it could still be attached to the keychain without bothering the user. Those who prefer to carry the Prybar12 in their pocket can do so with the integral pocket clip. Like all Ansø tools, the Prybar12 is completely manufactured in his workshop in Denmark. The titanium is first blasted, then stonewashed and finally color anodized. By the way, the name of this tool alludes to the saying that its 12 o'clock somewhere in the world right now! Cheers!   Technical specifications: Length:  97 mm Width: 26 mm Thickness:   5 mm Weight: approx 40 g Material: titanium Finish: sand blasted and stonewashed Inlay: timascus

Anso Prybar12 Titanium Amber Finish With Green Canvas Micarta Inlay  pocket pry bar and bottle opener made of titanium Amber finish green canvas Micarta inlay It´s twelve o'clock in New Zealand... Prying is something you really shouldn't do with a knife. Sure: a really sturdy full tang survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you. Therefore, small pry tools have recently become more and more popular in the EDC community. Now there is also is such a mini pry bar from Jens Ansø. With its 10 cm the Prybar12 is still compact enough that it could still be attached to the keychain without bothering the user. Those who prefer to carry the Prybar12 in their pocket can do so with the integral pocket clip. Like all Ansø tools, the Prybar12 is completely manufactured in his workshop in Denmark. The titanium is first blasted, then stonewashed and finally color anodized. By the way, the name of this tool alludes to the saying that its 12 o'clock somewhere in the world right now! Cheers!   Technical specifications: Length:  97 mm Width: 26 mm Thickness:   5 mm Weight: approx 37 g Material: titanium Finish: Amber Inlay: Micarta, green